Quote:

Today I was bored and decided to paint a hood I have laying around the farm.
I just scuffed it with 220, I then took Tremclad Recreational white, and added a few table spoons of Tremclad gloss black into the 6 0unces of paint (now very light gray hue to it), I then added about 3/4 of an ounce of Evercoats DOI wetlook hardener, and 2 1/2 ounces of generic medium speed enamel reducer(xylene content).
I used my not-so expensive, HVLP 1.4 tip gravity feed spraygun, and layed on a mist coat, on the one side of the hood, let this flash about 20 minutes and then shot on a nice medium coverage film.
It looks great, no runs, no peel, and it is still flashing, might add a 3rd coat. ....




What are the suggested safety precautions when doing this? That is, does the hardener contain isocyanates?