Quote:



Is there some big advantage to using Brightside over Rustoleum?



Yes. Brightside is designed to be put down and left alone.

There was some discussion here initially about abrading the surface of a monourethane with polishing because it is designed to seal on application, and disturbing that seal would theoretically be bad.

However, Aussie and Marq have shown that it polishes up nicely.

If you could lay Brightside down smooth enough it is possible you could perform a decent "roll and go"

Rusto, on the other hand, is old school, literally. Just like your grandfathers Oldsmobile, you have to actually polish the car and keep a coat of wax on it to maintain the surface shine.