Marq!

I'm reading all the 3 topics for about 1 week now non stop!
Good job for introducing the Brightside paint!
I'm from the Netherlands, and I'm going to paint a Nissan 240SX in Brightside Fire Red.

Most of your information is pretty clear, but I still have some questions mate.
I hope you will answer these by yourself.


1/ You use a 4inch high density foam roller for applying paint, and a second roller for popping the bubbles and flatting the paint. What kind of roller must this second roller be?
Also a 4inch foam roller? or an other kind of roller?


2/ My car has a lot of difficult places that are impossible to roll.
I want to spray this with rustoleum fire red.
In what order is this the best way to do it?

I'm planning to brush the paint in all the corners and hard places.
How much paint can I brush on this places? A thick layer? or a thin layer ?
Then I want to let it dry for about 24hours, after that wet sanding with grit 400 and use spirit, and then begin to roll my entire car for the 1st layer.
Is this the right way?


3/ How much paint did you use on your car?
Here in holland we can buy the Brightside paint only in 1 Liter (=0.264 gal)
or in 2.5L (=0.650 gal)


4/ Where are all your photo's mate of your car?
Al the links are dead in the old topics from 2006.


So much thanks for answering
Greetings