Quote:

---

woww ,very impressive finish you got there
few questions if i may ;

have you taken out the front and rear windscreens
out for painting to avoid paint line on the rubbers ?

looking at the pics on your blog,i understand
you have not done any wet sanding between coats ??
was the brightside paint able to lay down that good ??
if i am right ,how much of thinners did you
use to thin down the paint ??

---

Thanks everyone for the comments.

I better answer these to clear things up.

I didn't take out the windscreen or rear window, instead I used a thick cord and placed it around underneith the window rubber, therefore when I painted, the paint was able to ge underneith the rubber.

I did wetsand between ever single coat, I didn't put any pics up of this as I felt they were pretty boring shots.

Brightside was great paint to work with, I still have almost a litre of paint left (used 3 litres on my car) so I have plenty to do any touch ups.

Here is my paint mixture I used:
375-400ml paint
100ml penetrol
75ml mineral spirits (mineral turps here in Australia)

Cheers all