Marq,


1/ Should the paint as thin as water when mixed?
Just as the Rustoleum paint?


2/ Ok, so about 4 liter is enough for an average car


3/ ok, I buy mineral spirits for thinning and whipping my car


4/ Do you know the brand "Motip" ?
I primed a little bit of the rust pieces of the car with this spray.
I hope the Brighside will stuck on this primer.


5/ One thing is not clear for me...
In what direction did you roll 1 piece of the car?
For example the hood.

Begin in the corner on the bottom, and go up and down al the way horizontally?

| | | | | <-- in vertical lines?

-------- <-- or in horizontal lines?


6/ How much roller "paintholders" did you use?
Also 12 ?? every roller a new holder?
(I don't know the English word haha)

7/ Is mineral spirits the same as White spirit ?

8/ Do you have a picture of the 4inch roller you used?
Must this be a mohair roller? or a high density foam roller?

9/ Did you also used the foam brushes??
Or only the paint spray for in the corners?
If so.. how much foam brushed did you uses?
Also 20 brushes?


10/ Why did you use brake cleaner in the corners that are difficult to reach?
Can't you use mineral spirits in this corners??
Or is a spray easyer?

Sorry for all the questions!