Hey all, I joined here to chat about this DIY paint job, which I am interested in. I am taking the summer off from college and I have plenty of free time, so this sounds like a perfect summer project.

The car: 1997 Acura Integra GSR
The photos:

Paint fading and peeling on the front fender

A dent that goes to the metal, use Bondo or knock dent out from the inside?

Paint faded on the hood with etched bird crap

Clearcoat tearing off rear bumper

Paint fading off of spoiler

Paint fading off of passenger quarterpanel

The paint I hope to use (Omni Blue Metallic):


I purchased the following from Home Depot/Lowes/Advance Auto:

3 qts. Paint Thinner w/ Mineral Spirits (though I think I have to return these for 100% Mineral Spirits, since nowhere on the can does it say the amounts of chemicals it contains)
2 4/100 Foam Rollers + Rolling hardware
1 ring of blue painters tape
1 qt. dark grey Primer
1 sheet of 400 grid waterproof sandpaper
1 metal paint spread plate
1 dust mask
1 4"x1" drill attachment sander

What else do I need?