Hi guys,

Today I told myself I am gonna do this. So I went down to Canadian Tire and purchased for now 2 different sandpaper grits, they are 150 grit, and 320 grit. I think charger and others recommended that people should not sand over 400 grit.

They didn't have 400 grit in stock so I ended up getting 320 grit. 320 will be my last sanding before rolling the car with Brightside Black (still have to search for it).

After I will purchase 600 or 800 grit to wetsand between 2 coats, etc...and maybe 1500 after for final coats...I am not sure yet.

I still have to sand all bodywork more, and then fill some dents with bondo, primer the bondo, and I should be ready to roll Brightside with mineral spirits...

It'll take a few days to finish sanding and bondo, but any pointers for the sanding stage?

- Michael

BTW: I sanded for 4 hours...my whole body hurts...lol

Last edited by My93Civic; 05/27/07 04:38 PM.