Quote:

Quote:

Is it possible to rescue a bad final coat?

If on the final coat you get alot of peel, will a good 2000 wetsand and polish save it and prduce the results?



100% yes, that is if you have enough paint to wetsand and polish without going thru the paint, making it transparent or opaque. Beware also of the "blochy" issue, if you sand areas too much and reveal the underlying layer of paint. Try and see if it works, what you have to loose?





The "blochy" issue Charger refers to is exactly what I commented about on the last page. My coat was too thin and when I tried to sand out the imperfections I sanded right through the top layer, no way to recover from that except to apply another coat. I dropped my mixture from 40% to 20% mineral spirits to allow me to lay a thicker coat. I checked on my first coat this morning before work and it has dried extremely smooth. I'm hopeful that a couple of these thicker coats and I'll be able to wetsand off the peel with no problems.