HELP!!!!!!!!
I've got bubbles MILLIONS OF THEM!
Here's my background.
This is not my first car to roller paint.
I rolled my 1949 Dodge Truck with Rustoleum Sunrise Red and Gloss Black with wonderful results. Used Mineral Spirits to thin. White foam rollers from Home Depot.
Now I'm working on my 1943 Jeep
Army Green (Equal Parts Rustoleum Hunter Green and Leather Brown). I've done two or three coats on the hood, fenders and grille. Did it just like I did the truck. But the bubbles are horrendous. I've tried blowing them out. I've tried going back over with light, light pressure. Nothing works. They are still there when it dries. What could be going wrong. Wiped everything down with mineral spirits before I started and let it dry. Can't figure this one out. Such failure after such success is really dumbfounding. I can't think of anything different between the truck and the jeep paint jobs. Would temperature make a difference? It was a lot warmer when I was painting the truck. Probably about 70 degrees with the jeep.
HELP!!!!!!!