Well Marq you are probably right on the coverage and paint thickness. i am kind of bummed, I wanted to do this method. I feel really bothered by the amount of time I have spent on this project, granted all of it was an 1 or 2 hours time slots but a far number of half days. I have now run into 10 hour days at work so after work projects have just about been wiped off my plate. I need to speed up the process so spraying looks like a real good option. I really appreciate all the help, if any of the paint pioneers have some advice on spraying rusto with a harbour freight gravity HVLP gun. Should label thinning recomendation be ignored like when rolling (can says no more than 5%) recoat 24hrs in optimum conditions 48hrs if NOT should I go with 7-8 sec. drip test? 1,2,or 3 coats expected?