Finally started painting.
I tried the roll and tip method on the running boards but was not happy with the finish so I tryed using the foam brush only method,I like what I am seeing {so far}. I have two coats on the glove box and one coat on the doors,hood parts ,trunk lid and front fenders.
Tremclad 70 % mineral spirits 30% then added a couple of ounces of penitrol.
I loaded 3" and 4 " foam brushes and made one constant pass that gave me complete coverage no bubbles what so ever after I finished each panel I made only one pass with the foam brush {vertical strokes } . Looks promising so far.
Keep in mind My coupe is all apart so I am able to paint almost everything while it sits flat on a table


http://i207.photobucket.com/albums/bb126/tonto4807/DSC01880.jpg
http://i207.photobucket.com/albums/bb126/tonto4807/DSC01883.jpg

http://i207.photobucket.com/albums/bb126/tonto4807/DSC01888.jpg
http://i207.photobucket.com/albums/bb126/tonto4807/DSC01889.jpg
http://i207.photobucket.com/albums/bb126/tonto4807/DSC01864.jpg
http://i207.photobucket.com/albums/bb126/tonto4807/DSC01918.jpg
http://i207.photobucket.com/albums/bb126/tonto4807/DSC01921.jpg
http://i207.photobucket.com/albums/bb126/tonto4807/DSC01932.jpg
http://i207.photobucket.com/albums/bb126/tonto4807/DSC01933.jpg
http://i207.photobucket.com/albums/bb126/tonto4807/DSC01937.jpg
http://i207.photobucket.com/albums/bb126/tonto4807/DSC01938.jpg
http://i207.photobucket.com/albums/bb126/tonto4807/DSC01917.jpg

http://i207.photobucket.com/albums/bb126/tonto4807/DSC01928.jpg
http://i207.photobucket.com/albums/bb126/tonto4807/DSC01931-1.jpg

Last edited by Tonto4706; 07/29/07 07:45 PM.