Quote:

Hi Soopernaut.
I cant picture the textured roof - is it like a vinyl roof ? I guess you could scuff it with a soft wire brush. It wont be a problem rollering it as long as you dont put too much paint on the roller.
The foam will contour to the texture as you roll I believe.
As for one thin coat on the bottom, that will prob be OK for flash rust, but in the long term it will be too thin to protect from stones etc.
I would go straight unthinned on the bottom - or maybe 5% thinned.
Cheers,
Frank.


Thanks for the reply.

The roof has a simulated vinyl texture created with paint.

For the bottom I didn't plan on leaving just 1 thin layer. I just thought there could be a bit of time between the first and second layer and didn't know if the protection against rust would be there. I guess I'll put in on full strength because it probably won't matter if it doesn't fully harden. I'm not going to buff it or anything.

1970 Dodge d100/eventually going on a 77 D100 frame