Quote: i would say all the holes can be done this way, if you go to a welding store or a good auto supply store they sell the copper block that is magnetic. granted you have to take off inner door pannels for example to get the block in behind the pannel but they are all accessable and can be done with this method. i've done it alot and it really works good.
If you cant weld like me you can cut a piece of sheet metal and use panel bond adhesive to cover the hole then just use a skim of bondo over it. Works fine for a driver.
Also I was playing around with this way of painting and wondered if anyone has tried to use the same color Rustoleum in spray to do the jambs and engine compartment.
77 Macho Power Wagon LWB factory 440
70 Coronet 440 N code 3 speed
