Hey Man
As I read your post, it seemed you were documenting my journey on this paint process. I've done 2 coats, *very thin* and when I wet sanded, it seemed I was back down to almost one coat. After applying the 3rd hours ago, the car is now 95% covered. Im figuring when the fourth goes on, it will be completely covered, and that if I use the 800 grit, I can probably do a good sanding, while not removing any coats, and smoothing out my surface. the 5th and 6th will be definate coats, no covering up any uncovered spots. Refer to my previous post a couple posts ago to see how thin my first coat was.

Needless to say, it seems like I am still on the right path and that so far I have made few to no errors in my process. After laying out the 3rd coat, the car is finally taking form and starting to look like a respectable car once again. I can only imagine what 3 more coats, a good buffing, and a polishing like this cars never seen before, will do for my baby.

Good luck man, post pictures! Ill get you some more tomorrow when paint is dry.