Quote: Im very excited about this topic. I've been doing my research and reading as many post as i can. I'm planning to turn my dark green Integra into a nice gloss White.
My questions is..for the wetsanding process, are you "hand" sanding everything? or using a sander?. or does it mater?
Hand sand it.. it doesn't take a lot of work, a sander would be way overkill and you could do more damage than good. Do use some kind of block. I have used those 3m sanding "sponges", they come in 60, 100, 150 grit etc. I like the 150 grit as the 60 grit has too coarse a surface for a nice smooth surface. They might have higher than 150 in which case I'd get one of those, but I've used 150.
They are soft but firm enough, just wrap them in your wetsanding paper and dunk the whole thing into your water.
