Just finished coat 10 (I think). The color is almost fully covering the dark spots. My plan is one more coat, a strong wetsand with 600 or 800 to get it very smooth, then another coat or two to finish it off. Then I can go back and paint the areas I touched up which are mainly on the passenger side.






If you look at this pic you can see the driver's quarter behind the gas cap has more of a dull reflection than it should (the middle section). I may have rolled over it after it started to self level and it never recovered. Or maybe I just didnt' wetsand it well last time. It seems to be the only area of the car where the shine is this dull because I take it the surface is not as flat/smooth. If it dries like this, I'll wetsand this panel before I lay the next coat on, then the reflection should be as sharp as it is on the door or even forward of the gas cap, after the next coat.