Tyler, ya got to take a better picture man. Who knows what that is. My guess is it's running; don't put it on so thick or don't thin it so much before putting it on that thick.

Buick - if you can't get it to shine as much as you like, pick up a quart of brightside which should be enough to do your car 2x. One coat of brightside would do it but two would be extra in case you wanted to sand it down smooth and polish. Compared to rustoleum, the brightside is quicker to apply also. I've had good luck spreading it on then rolling over it 10 minutes later to get any remaining bubbles and smooth out runs.

Come back in 4-5 hours when it's totally level, and the shine will ride your wig off.

Just another option to consider if you can't get the rustoleum to shine to your satisfaction.

I'm anxious to see aussie driver's results after the sanding and polishing..