Quote:



However... there are many edges that - despite careful sanding - have been sanded down to bare metal, and I am concerned about skipping the Pre-Kote primer. Otherwise, the hood is in good shape, with about only 2 *tiny* nicks that I have found that are too deep to sand out. After all, the paint does say to prime bare metal...

These spots are small, but you know how it is with edges... everything just comes right off!




On my bumpers, I sanded much of it to bare metal. No problems covering. A few coats and it was a uniform color. I did not see any need to primer. My experience, Mark E.