Stopped by and read this thread when it was only the middle of Part I! And now it's still going!

The biggest hurdle is the prep. It'll save time if you don't use too rough a grit for prep. Not much discussed on the threads about especially what grit to use for the sanding. You can run into a lot of extra work by using too rough a grit to prep. This person tried to remove the entire clear coat by wet-sanding at first! Lots of pictures, too, from a novice's perspective. Using Rustoleum and 100% mineral spirits and roller, but it turned out nice. www.moparts50dollarpaintjob.webnode.com