Quote:

---

I spent 1.29 on a 4" foam brush.

I wet sanded the first coat down, thinned another batch, probably around 40%, maybe 45%, and hit it with the foam brush.

Like glass. No bubbles, and it is incredibly easy to lay a *very* even and *really* thin coat. Very easy to blend. I coated in pretty much 4 quadrants of the deck lid and as I finished each one, blended with some nice long sweeps of the brush...well... here's what I got...

And no brush marks. Those lines you see running front to back are the reflection of the ceiling boards.

[/image]http://img384.imageshack.us/img384/9466/1000550smwk0.jpg[/image]

---

I did a little messing around with really thinned out rusto (50%ish) and tried foam brushing it...



it dose self level really nicely....when its a flat plece. I tried a vertical test piece and it got a bit runny. and its still drying after 5 hours, guess I should mess around with it a bit more.




also has anyone used penetrol with rusto yet? or just brightside.