I eliminated 6 lbs off the front end of my car with using aluminum bolts.
I took off 1 lb on the rear alone by cutting off excess bolt material on the U-bolts holding down the rear.
1 lb by eliminating excess material off the inside of the glove box door.
A couple of pounds on the rear end Dana cover by using the stamped anodized Moroso gold rear cover, paint it black and whalahh, stock!

Valve covers using Moroso's stamped gold anodized units with the Moroso logo hand hammered flat and sanded make for a stock looking cover once painted race Hemi orange with 413 Super Stock decals. 2-1/2 lbs right there.

Last edited by fullmetaljacket; 12/19/12 01:16 AM.