Originally Posted By Thumperdart
Thankxx, I think the width was an issue also but not 100% sure on that....... work


I remember some guys doubling up the gaskets to clear
rockers BUT I forget what rockers on BB... on my covers I had
to mill the outer(lower edge) to clear my springs.. I am
using 1.65 OD and things were hitting before I milled the
lip... plus I had to clearance the gasket.. I use the MP
silicone over a steel core.. life time ones)... all extra
work to run that diameter spring... even the 1.55" OD spring
was gonna hit or be very close
wave