I had an automatic brake pedal assembly and a column out of a 65 Coronet gifted to me.I removed the 2 pedal and put the auto one in.Still waiting to find the material to fab an aluminum brake pedal arm.
The column wire harness was changed by the gifter to the 63 harness as the 63 and the 65 uses different connection plugs.When I get into that when time allows,I will change out the solid shaft to CM tube and install a removable steering wheel.I wish to keep the directional switch because afterall,,,,it's a street car

Supposed to get the car back tomorrow.Added about 40 lbs near the rear bumper............