Man, this is a lot of work especially with a cut-off wheel and a sawzall. Havn`t messed w/the plasma cutter but sure have been wearing out sawzall blades and after removing the rear windows(will be lexan),cutting out all metel behind the ft. and rear windows and excess trunk material and all interior and trunk carpet plus one battery we`re right around a 100 lbs. using a bathroom scale. I can replace the whole trunk floor w/alum. if need be to start fresh and fix my "patch" job I did years ago and still havn`t removed the ft. door windows and wind wings but I will have to put some back of course w/the carpet(no padding)and lexan which shouldn`t be much I hope. Really considering the dash area now and the steering colum for more removal but the plasma cutters going to be needed there.........THANKXXX FOR THE TIPS............