Thanks Marq for the in depth information. I haven't tried anything yet, but I plan to do a sample first to test out my technique and all. I know winter is coming, do you think it will be safe to apply the Brightside paint in temps between 10-15 degrees celcius? I'm shooting to do this in next 2 weeks or so.

It seems that I am going away from the original recipe of using Tremclad with rollers to get a better finish.
Now I'm interested in a spray gun, BUT I don't have a nice fancy compressor. I got one that pumps out 4.3Scfm @ 40psi and 3.7Scfm @ 90psi. It seems I'm stuck to using the very low grade general purpose spray guns such as this one:

http://www.campbellhausfeld.net/webapp/w...9&langId=-1

A question for anyone using a spray gun:

Is using any type of spray gun be any better than rolling it on. A HLVP gun would be nice, but my dinky compressor cannot support them I believe I read on earliar of people using spray guns for fencing, but I don't recall if they worked well or not.

Thanks.