Quote:

The ones doing the stripes/two tone paint jobs how are you doing <pic's would help to see it if possible>



look toward the bottom of page 27 to see pictures of my little brother's blue Camaro. (they are attachments at the top of the post) I laid out the stripes with plain ol' blue painter's tape and painted the primary color first. After all of the blue was on, I untaped the stripes and retaped them to mask the freshly painted blue. Then I applied the same number of coats of white as I had blue. after the paint cures sand down the ridges formed by the edges of the tape. The result is a stripe that you can't feel by rubbing your hand over it. (this is a technique that was used on show car stripes with lacquer paint jobs before polyurethane bc/cc was popular.

I hope that explaination answered your question.