Quote:

Hi Guys,

I'm new to this forum and I read the previous thread up to page 21 before I decided to go ahead and tackle this.


Lucky I have a some rocker panels to test on..however now I'm having some slight issue.

So I put on the first cost just fine: http://www.ss14.net/tmp/firstcoat.jpg

I let it dry overnight and when I put on the second coat...this happens: http://www.ss14.net/tmp/wha.jpg

Anyone have an idea what I did wrong? It's as if the paint came off when rolling. Did I put too much mineral spirits in the mix?

TIA

P.S. I like the smilies



That adhesion doesn't have anything to do with the % of mineral spirits, there must have been something on the surface that the paint didn't like. Don't know what that is because I haven't run into the problem myself.

As for letting it dry overnight, consider letting it dry longer than that before recoating. The previous layer should be very dry before anything is put over the top of it, so 24 hours is a safe bet but can be longer depending on weather.