Quote:

thats the 2nd coat

although the first coat did completely cover it.

i think its both too much paint and the mixture because even when i tried putting on tiny amounts i got lots of bubbles (smaller ones) so i kept going over it



My first thought about your bubble problem is that you 'might' not be using the right type of high density foam roller.

Tons of bubbles will happen if you use the less dense 4" roller. They are usually yellow foam. Because they are less dense and have more air space in them ( spongy ) they tend to transfer the air pockets of the roller over to the paint.

The high density foam rollers are usually white and the air pockets in the roller are like 1/10 the size of the air pockets in the cheaper rollers.

Dunno... but if the 4" rollers you are using can be easily pinched between your fingers... then they are probably the low density 'cheap' ones.

.