Quote:

---

Quote:

---

here is my pics and i am using the 3m fperfect-it 3000 rubbing compound

---

If you have only used a rubbing compound, then you will get a lot of hazing on your paint. Your process should be something like;

- Rubbing compound using a light cutting pad,
- A swirl remover using a light cutting pad then a second pass with a polishing pad,
- A polish with a polishing pad and then a second pass with a finishing pad,
- Then a sealant (either a wax or a synthetic sealant) with a finessing pad. {And do at least 2 passes with your chosen sealant}.

Work in each polish until it has almost disappeared, then wipe off any remaining residue from each stage with a microfiber cloth.

If you do the steps carefully and in order then there is no reason why you can't get a finish as good as Marq's.

---