Quote:

---

Wiring update. I wired in the trans temp gauge, trans cooler fan, and the high beam and turn signal indicator lamps.

Electrical work left to do:

- Run various ground wires to the frame
- Run battery cables
- Wire up the horn relay
- Install the steering column (temporarily, for circuit testing)

I'm on track to check the circuits next weekend. The dash panel will not be installed during testing. I'll use my battery charger in place of the battery, set at a 10 amp output.

Once everything electrical is shown to be working properly, then I will install the stereo system.

---

Wiring update. I didn't get much done yesterday, due to a pounding sinus headache, but I did get all of the ground wires screwed to the frame and/or body. All I have left to do is install the positive battery cables, and install the steering column. I will get the column installed today, but I'm waiting on 1 gauge cable solder lugs to get here sometime later this week.
I'll be testing circuits next weekend, FOR SURE!