Forget that dash layout I posted earlier, here is the final dash layout. I'm going to make angled mounting cups for the four gauges, which will be mounted to a common mounting plate, so they can go in and come out as one unit. The angled housing for the radio and CB isn't done, obviously. I still need to make faceplates and brackets that will secure those units to the housing. The housing itself will be attached to the dash panel by four 1/4-20 studs.




In case anyone was counting and noticed a gauge missing, I liked the looks of the 4 gauge cluster, so I'm going to mount the trans temp gauge on the center console in an angled cup, just like the other gauges.