Did some more work on the frame. Fabbed and welded in a body mount crossmember and two body mount brackets, shown in the foreground. Except for the new motor mounts and painting it, that should be it for the frame work. I think I'm going to spray the frame and axles single stage gunmetal gray.



I've made up my mind on the wheel and tire combo. For tires, I'm going with Nitto Trail Grapplers in 37x12.50R17. They will be mounted on Pro Comp Series 98's in size 17x9 with a 3.5" backspace. These wheels are basically the same as Cragar Soft 8's.