Hi Dave,

You posted on my thread on dodgecharger.com, thanks again for the advice.

I have measured the PVCR, they are approximately 0.056"


Not done any more tuning on the carb; I've had some overheating issues that were caused by a defective thermostat.


Thanks all, for the great advice in this thread!


Frederick

383B, 9.8:1, Lunati 60302(220/226@0.050 262/268Dur, 0.475"/0.494", Stealth heads, Performer manifold, QF SS-750-AN carb, 3.31Diff, A833 4-speed manual.