There are several postes from AndyF regarding rockers in this thread. I thought Harland Sharpes got his 100% blessing for proper geometry. I don't know what your specific issue is, but RUN FAR AWAY from those rockers!
Rockers are no place to pinch pennies. Don't take a chance killing your expensive new bullet!
Anyone who saw our geometry display at Carlisle, knows Harland Sharps don't have anywhere near good geometry. Any roller rocker, for that matter, without some adjustment.
Guess I`m fortunate so far cos after lash caps, the scrub was decent and went from slightly outboard then inward on rpm heads and HS 1.5`s which measured 1.54 at the retainer. These are roughly 10 years old and I checked the guides and everything was good after a good amount of street driving and some passes........
72 Dart 470 n/a BB stroker street car `THUMPER`...Check me out on FB Dominic Thumper for videos and lots of carb pics......760-900-3895.....
