Quote: ....it's odd that the brake line got a minimal amount of undercoating while the floor pan on either side and underneath appear to have a generous amount.
This is why you can't judge something from just one picture taken at a skewed angle. I took a couple of photos of the same area to show just how MUCH undercoat was applied on the brake line. The photo you referenced shows only a two dimensional "look" at the floor pan. There is a step that actually comes down and the line is partially blocked by that area. You can see where the undercoat has a bare area behind the line. Also notice the rubber floor plug that exhibits the same bare spot BEHIND the plug, due to the directional spray of the undercoat. Had we covered the back side of that brake line it would have been a contradiction to the direction that it was sprayed! THAT is the type of incorrectness that ruins many of the OE cars that compete in the program. (Lack of thought as it pertains to the trajectory of how things were physically applied or finished.)
