I ended up buying another set of used 6.4 injectors. I'll be installing them this week and getting it fired up again.

What I did this weekend:

Throttle cable is working, needs a stiffer spring.

Shifter linkage is connected correctly, my 3/4 tab was upside down.

Hubs are fastened with the correct hardware.

Found the correct banjo bolts for the viper calipers. I can finally bleed the brakes. This is a hugely helpful article. http://www.pro-touring.com/threads/10967...nt-them-for-all

Once the brakes are working, I'm putting it on the ground again and doing the fuel injectors.


My Build thread: Let the hemi swap begin!

1968 wanna be pro touring whatchamacallit with some fancy stuff and a new roof skin.