Quote:

---

Mal, I'm using the TTI motor mounts. I'm also using the factory style insulators, but one side is a Moroso solid mount. That is the the only exception.

That has nothing to do wth the Hemi. I would use the same factory insilator and Moroso mount with any SB or BB

---

Mal,

Please look at both of these pictures.

The first one shows a factory rubber insulator mount with the "nub" on it. That's what caused me grief on the passengers side. You can clearly see it attached to the black TTI plate.



On the drivers side, take note of the silver mount with the pass through bolt holes. That is a solid Moroso mount that fits SB/BB for this style of engine mount. It was my alternative to running expensive engine mounts. It did not impair my install at all.



The TTI mounts are excellent in my opinion. For my application they were as good or better than my factory BB pieces.