Quote:

Yes its the EZ kit for Multiport. I am not doing any forced induction so the EZ will work just fine for my application. I am using the MSD HEMI 6 for the coil packs.
Oh and the harness for the EFI is a kit from FAST



Rick,

Looks really awesome. If your running pump gas start with the WOT AFR around 12.6:1 to 12.7:1..The more ethanol in it, the lower the AFR...

Also, make sure the switched power wire is always hot when transitioning from start to run and does not loose power while transitioning. Only when the key is in the off position. Its tough to find a wire on a mopar that works for that sequence. Mine kept dumping everything it learned because of that.

What is your Hp and ET goal with that set-up? What do you think it will run?

Last edited by Dragula; 12/31/11 08:07 PM.
'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk