so the oil filter wont screw off so i guess i need to run a relocation kit, or jack up the motor every time i change the oil
so the question is, what is the thread size on the hemi engines? does anyone recommend a good value on a oil filter reloction kit?
My 08' 6.1 motor had a 3/4 - 16 thread. I'm using the Moroso Remote Oil Filter Unit #23682
After reading this, I thought I better re-check mine,,,I believe IT IS a 3/4"-16 thread in the block...!! Sorry, I used an oil pan drain plug to determine thread size the first time,,,used a tap this time,,SORRY to give out wrong info,,,usually don't give info unless I'm 100% sure of accuracy, kinda' jumped the gun alittle here. Although, I'm really surprised just how close the two threads are actually....
Chapper, your honing plate should be there in a day or two. just thought you might want to know. thank you.
Recieved plate today,,,Dan's 'da man!! THANKS.
If you like drag racing, support your local track.
After reading this, I thought I better re-check mine,,,I believe IT IS a 3/4"-16 thread in the block...!! Sorry, I used an oil pan drain plug to determine thread size the first time,,,used a tap this time,,SORRY to give out wrong info,,,usually don't give info unless I'm 100% sure of accuracy, kinda' jumped the gun alittle here. Although, I'm really surprised just how close the two threads are actually.... 
