Quote: Yes its the EZ kit for Multiport. I am not doing any forced induction so the EZ will work just fine for my application. I am using the MSD HEMI 6 for the coil packs. Oh and the harness for the EFI is a kit from FAST
Rick,
Looks really awesome. If your running pump gas start with the WOT AFR around 12.6:1 to 12.7:1..The more ethanol in it, the lower the AFR...
Also, make sure the switched power wire is always hot when transitioning from start to run and does not loose power while transitioning. Only when the key is in the off position. Its tough to find a wire on a mopar that works for that sequence. Mine kept dumping everything it learned because of that.
What is your Hp and ET goal with that set-up? What do you think it will run?
Thanks Dragula I will try the air fuel ratio you suggest. It will be pump gas, compression is 11.3 to 1
Im hoping it will make 525-575 to back tires if it does that should put me around 10.00 or faster
