I love those tires. I will never run aything else. You just have to get the pressure right. I heard they need more pressure than the bias ply's and so I started out at 20 PSI. Car launched real well on the hit and then just spun and squealed real loud! But I was comparing to what the stockers run for Pressure, but that is a smaller tire. Bigger tires do not usually run as much pressure. So I went down to 17, then it dead hooked. I usually run 16-17 psi. Medium to light burnout. If these were bias ply's I would be at 11 psi. so they do require a lot more pressure. They ride better on the street and better stability at the track. It's all good.

Keep in mind this was all with the crate motor. No telling what it will do now. I have changed the car to be all pinned down right now to prevent a big wheelstand, so it may not hook. I plan on getting more agressive if needed, but for now I want to keep the front end LOW! Don't want to smash those headers any time soon.