Quote:

---

Ron,

Looking good!
What are the tube lengths on your headers?

---

Long, and F-ing long! LOL Well, I shoot for the shortest tube to be no shorter than 34" (since I have an automatic trans). On that header above, the #8 cyl would be the shortest and I measured it at roughly 40", so I am good. The ones that go through the K-Member are 50+ inches, probably something like 55"

There is another reason I built these headers. I welded the V-Band rings to the collectors and assymbled them to the secondary exhaust system in the exact same place as the crate motor collectors were. That way the headers and engines will directly interchange with no secondary exhaust mods. It also gives me a solid, repeatable location to build each tube to. That is extremely important when building headers.

There is a method to my madness