Quote:

Quote:

Quote:

I finished the 501 today. It took almost exactly 11 months!

Who wants to put it on the dyno??



You know we're available!! Who is doing the article?



John McGann of Car Craft Magazine was supposed to do a big stroker small block shootout between Ford/Mopar/Chevy. But last time I E-Mailed him he did not respond. Plus I do not think he wanted to dyno it anyways. Just pics and specs.

I figure if you or Steve wanted to dyno it I may let it happen. I do not have headers or a redundant ignition or carburator (yet), but could come up with plug wires if needed.



We have an MSD digital 6/HVC coil and good wires. Also have TTI 1 7/8 headers, and some others.
You'll get better #'s from Westech I guarantee that!!
I just calibrated our dyno and it was spot on with what DTS outlines.
We're doing another build with John, but he's been out of town on assignments alot so he's very busy and has to basicly list things of importance and go from there. Plus, he's not in total control of what he gets to do.

But he's a very nice guy and easy to deal with. I'm sure if you document everything well and take good pics he'll find a way to run the story.
He uses alot of my pics.

I know Steve is probably closer to you Ron, so I understand if you take it there. Just thought I'd pimp us a little

Brian Hafliger