Thanks (to the last 3 individuals who posted) so much for the encouragement concerning this project. I will be documenting and providing a step by step analysis for anyone who is interested about the steps that will be taking throughout the entire process. We will be documenting the mil thickness of paint on every square foot of each body panel. It will be interesting to see the variance of paint that was applied during the factory painting procedures.

The first thing we will do will be to get the car on a lift and have every inch documented with digital pictures. Jon (who does our graphics) will position a camera under the car, while it is suspended and take pictures spaced six inches apart. It will take over 100 pictures that will then be put together in photo shop to provide a seamless view of the complete underside of the vehicle. We will also take separate close up photos of all the various components under the car. A narrated video documenting the same details will also be used to reference the original components. That should accurately cover every detail/part that will need to be reinstalled when finished at a later date. Take a look at the underside of the Challenger that Jon put together in photo shop. It was done with about 50 pictures that was fused together using computer programs. To complete this photo the camera was spaced about 12 inches apart.

Using a six inch picture format for the A Body project should provide a much better view of documentation for the components.