Type:B block
Displacement:383+.030 stock crank...440 rods
Compression:10:1(estimate)
Head type:906's pocket ported 2.08/1.74 valves
Cam type:Comp cam XE285HL hydraulic
Specs:241/247 at .050... 545/545 valve lift
Installed at:106 degrees
Intake manifold:Edelbrock Performer RPM
Exhaust:1 3/4" primaries 3" collector 2 1/2" pipes
Carb type:Holley DP
Size:750
Jetting:70 front 80 rear
Base timing:?
Total timing:38 degrees at 1800

Power adder:N/A
Type:N/A
Blower impeller speed:N/A
Nitrous jet combo:N/A
Amount of positive manifold pressure/nitrous hit:
Intercooler:N/A
Timing pulled if any:N/A

Trans type:727 with B&M shift kit
Torque converter:Turbo Action 10"
Stall behind your motor:3200
Gear ratios:stock

Rearend ratio:3.91
Tire size:28 inches
Vehicle weight:3500lbs.(estimate)
Horsepower:N/A
Torque:N/A
E.T.12.40 in 1/4 mile
MPH:108.9
Comments:This is with no tuning other than setting the timing at 38 degrees advanced at 1800 rpm.