Type: RB block
Displacement: 446" (440+.030)
Compression ratio: 9.8:1
Head type: 902 casting, 2.14/1.81 valves
Cam type: Hydraulic
Specs: .484 lift 108 LSA
Installed at: 104
Intake manifold: Edelbrock Performer RPM
Exhaust: 2" primary 3.5" collector, 2.5" h-pipe exhaust.
Carb type: Holley Avenger 770
Size: 770
Jetting: 72 front 78 rear
Base timing: 12 degrees BTDC
Total timing: 32 degrees BTDC @ 2000

Power adder: None
Type: NA
Blower impeller speed: NA
Nitrous jet combo: NA
Amount of positive manifold pressure/nitrous hit:
Intercooler: NA
Timing pulled if any: NA

Trans type: 727 auto
Torque Converter size: Hughes 2500
Stall behind your motor: 2800
Gear ratios: stock

Rearend ratio: 3.91
Tire size: 28"
Vehicle weight: 3850
Horsepower (if dyno'd, specify FWHP or WHP):
Torque (as above):
E.T. (specify 1/8th, 1/4): 13.304 1/4 mile
MPH (as above): 105.65 mph