Type: A block
Displacement: 323"
Compression ratio: 8.5:1
Head type: stock 318
Flow #s (if any): none
Cam type: hydraulic flat tappet
Specs: .420"/.420", 204* @ .050 lift
LSA: 114
Installed at: ?
Intake manifold: Edelbrock LD4B
Exhaust: TTI Headers, 2.5" X Pipe, Dynomax Ultra Flows
Carb type: Edelbrock 600cfm
Size: 600
Jetting: stock
Base timing: 15*
Total timing: way too much
Power adder: none
Type: N/A
Blower impeller speed: N/A
Nitrous jet combo: N/A
Amount of positive manifold pressure/nitrous hit: N/A
Intercooler: N/A
Timing pulled if any: N/A

Trans type (manual/auto) Auto
Torque Converter size: 2000rpm
Stall behind your motor: Not sure
Gear ratios: (stock / custom) stock

Rearend ratio: 3.55
Tire size: 25.3"
Vehicle weight: 3400 estimate
Horsepower (if dyno'd, specify FWHP or WHP): ?
Torque (as above): ?
E.T. (specify 1/8th, 1/4): 14.87
MPH (as above): 92.6
Comments: SPAL Dual Electric Fans, motor has stock internals.