[quote=Quicktree][quote=Monte_Smith
Lets use your own logic against you. Would you agree, that most every factory car, has some downward angle in the rear of the motor, from the factory. Most would agree yes and be right. That factory car is set up for a certain size tire and to achieve "proper" driveline angle that you preach about......agreed?........Now, put a TALLER tire on the back, but give the car the SAME ride height. Factory geometry immediately wrecked because the pinion is HIGHER and any attempt to get "proper angle" results in positive pinion angle.........Think about that one a while.............LOL!!!
You need to think about that. When considering the pinion angle, you are not concerned about the ground. The car could be hanging from a toe rack, with the pinion straight above.
Trust me , you will get this. Thumps up. You have Nitrous nailed, but not pinion angle yet. Thumbs up again, since the icons aren't working for me.
