I've left out alot of details that should probably be posted somewhere else, but anyway now the thread is mostly up to date so here is the current situation.

Stripped the trunk floor and wheel houses of the EDP, applied a few coats of epoxy/good for now.
Roof/quarters/dutchman/trunklid epoxy, filled, blocked to 40/80, surfacer and blocked to150/220....ready for 320 overall* next.

*overall because I haven't blocked below the character line at all and don't intend to, until it's up in the air....when it is, then I'll do the whole car below the character line.