Originally Posted by second 70
Originally Posted by Keepat
Originally Posted by larry4406
Nice shop Pat!

I like those lights. What are they?

Big Ass fan is a nice addition.

Jackshaft door operators as well!

What is the size? Ceiling looks to be 12-14'?

Exterior shot?

Keep us posted on your next project.

-larry


LED 4x2 panel lights, I’ll let you know how they work.
https://www.amazon.com/dp/B0849TG3B3/ref=tsm_1_tp_tc

The shop is 48’x32’ with 13’ ceiling just enough room for the tall two post lift.

Thank You!

[Linked Image]



Hey Keepat I really can't tell on your both your doors but the lower panels on the left door seem to be bent in the middle. I had the same thing and it's the door bending in the middle when it opens. It will end up tearing the panels open. I didn't have a clue since I use the same jackshaft openers you do. I didn't catch it until I unhooked it and operated it by hand.

The fix is to add struts to door. At less that $25 each I just added them to each panel.


Thanks for the note, and good eyes! Actually the bottom panel is bent from the previous owner closing the door by stepping on that lip.
My garage door opener man is coming back as soon as I put a coat of paint on the outside of the door to readjust the springs for the new weight of the doors.
Thank You!
Pat